What clearance is required around electrical panels?

The Occupational Safety and Health Administration (OSHA) and the National Electrical Code (NEC), require that electrical panels have a minimum of 3 feet (36 inches) of clearance and a minimum headroom of 6.5 feet or the height of the equipment whichever is greater.

What is the minimum working space needed in front of an electrical panel?

Working Space around Indoor Panel/Circuit Board (NES 110.34)

Voltage Exposed live parts to Not live parts (or grounded parts)
2.5 KV to 9.0 KV 1.2 Meter (4 Ft)
9.0 KV to 25 KV 1.5 Meter (5 Ft)
25 KV to 75 KV 1.8 Meter (6 Ft)
Above 75 KV 2.5 Meter (8 Ft)

Can I build a closet around my electrical panel?

The short, safest and most efficient answer to this question is yes. According to the national code, with relation to electrical panels in closets: NEC 240.24D Overcurrent devices shall not be located in the vicinity of easily ignitable materials, such as a clothes closet.

Is it legal to cover an electrical panel?

You are allowed to cover your electrical panel but it must be easy to open, can not interfere with the opening of the steel door of the panel and you have to make sure you have full access to all of the breakers. Keep in mind that some local electrical codes may prohibit the covering of your electrical panel.

NEED TO KNOW:  Can molten lead conduct electricity?

Can anything be in front of an electrical panel?

The height of the working space must be at 6-1/2 feet. Other electrical equipment located above or below the panel cannot protrude more than 6-inches beyond the front of the panel.

Can a junction box be in a closet?

Yes, you can put a junction box in the back wall of a closet. The box must remain accessible, and if you don’t have enough slack to provide 6″ of wire at the box you will need to install two boxes and a additional run between them.

Can an electrical panel be located in a bedroom?

The NEC does not prohibit a panelboard or overcurrent device from being located in a bedroom.

Can an electrical panel be on an interior wall?

Installation. Electrical panels mount in interior walls or hang on basement walls. … For an interior wall, the closest the panel can be to a perpendicular wall is the space between that wall and the nearest stud, where the panel will be mounted for support.

Can you cover an electrical panel with a picture?

A picture is fine since it can be easily removed to service the panel.

What can I use to cover an electrical panel?

Give the window a few quick sprays of mirror-like glass spray paint, hang, and hide that hideous electrical panel. In this stylish laundry room featured on Better Homes & Gardens the breaker box is disguised with a hinged magnetic chalkboard.