The short, safest and most efficient answer to this question is yes. According to the national code, with relation to electrical panels in closets: NEC 240.24D Overcurrent devices shall not be located in the vicinity of easily ignitable materials, such as a clothes closet.
Can a breaker box be in a closet?
ANSWER: According to Section 240-24(d) of the National Electrical Code (NEC), which says “Overcurrent devices shall not be located in the vicinity of easily ignitable material, such as in clothes closets,” you are not permitted to do this.
Can you enclose an electrical panel?
You can definately enclose the panel in a closet, just not in a clothes closet. As long as the door to the closet provides sufficient working clearance (30×36″ as stated) I wouldn’t see a problem with the closet not being a full 36″ deep.
Where can you not put an electrical panel?
You cannot place an electrical panel in any tight space that does not provide for a clear working space. Breaker boxes must have at least 30” wide clear working space laterally in front of them.
Are electrical panels allowed in bedrooms?
NEC does allow electrical panels to be installed inside a bedroom. Bedrooms meet the NEC workspace requirements for electric panel installation. Electric panels are commonly found inside bedrooms in condos or small houses where space may otherwise be limited.
Where can a breaker box be located?
While every home is different, circuit breakers are generally located in low-traffic areas of the home, such as a basement, garage, or utility closet. If you live in an apartment, your circuit breaker may be in a more central location, such as a hallway or laundry area.
Can you hang a picture over an electrical panel?
Fortunately, you can decorate over the box to blend it in with the rest of the room. For a quick fix, try hanging a painting or covered frame over it. A circuit breaker can also be hidden inside a cabinet as long as you keep it accessible.
Which electrical panels are bad?
The most common bad electrical panels are actually identified by their brand: Federal Pacific, Sylvania and Zinsco, however, it is surprising how often distribution or sub panels are incorrectly wired.
Can an electrical panel be behind an open door?
I’d say as long as you can close the subpanel door in an emergency, so that you can get out when things go wrong, it should be acceptable. Small panels are located behind doors all the time. An example where it would be a problem, is if you have equipment with a door that can lock in the open position.
Does breaker box have to be on outside wall?
3 Answers. They are almost always on an exterior wall. In some areas they are on the outside of the exterior wall – outside your house. Most inspectors would tell you that a garage (interior or exterior wall) or in the basement exterior (right where the line comes in) are the two best locations.